Intel® Server System M20MYP1UR System Integration and Service Guide
7.1
Replacing a Power Supply Module
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
7.1.1
Power Supply Module Removal
The system MUST be powered OFF before removing the power supply module.
1. Detach the power cord from the power supply.
2. Push and hold the green latch in the direction shown (see Letter A).
3. Use the handle to pull the power supply module from the system (see Letter B).
7.1.2
Power Supply Module Installation
Slide the power supply into the power supply bay until it clicks and locks in place (see Letter A).
62
Figure 56. Power supply removal
Figure 57. Power supply installation