System Top Cover Removal / Installation; System Top Cover Removal; Figure 1. System Top Cover Removal - Intel M20MYP1UR Integration And Service Manual

Intel® Server System M20MYP1UR System Integration and Service Guide
2.1

System Top Cover Removal / Installation

Required Tools and Supplies:
• Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips* (cross head) screwdriver (#2 bit)
2.1.1

System Top Cover Removal

The server system must be operated with the system cover in place to ensure proper cooling. The cover
must be removed to add or replace components inside of the system. Before removing the system cover,
power off the system and disconnect all peripheral devices and power cable.
Note: A non-skid surface or a stop behind the server system may be required to prevent the server system
from sliding on the work surface. New systems as shipped from Intel will require a screwdriver to remove
three screws on the top cover.
1. If present, remove three screws from the top cover (see Letter A), and save them for future use.
2. Push down on the two top cover buttons (See letter B).
3. Slide the top cover towards the back to remove it (see Letter C).
14

Figure 1. System top cover removal