Cisco TelePresence System Series Hardware Upgrade Manual page 57

Options for the Cisco TelePresence System 1300
Revised: January 16, 2013, OL-16441-01
This chapter contains the procedures you perform to configure the hardware options for the
Cisco TelePresence System 1300 and includes the following sections:
•
•
Cisco Digital Media Player
The Cisco Digital Media Player (DMP) is a highly reliable, IP-based hardware endpoint that enables
digital signage and Enterprise TV through the ability to play high-definition live and on-demand video,
motion graphics, Web, and dynamic content on digital displays.
For more information about the DMP, refer to this URL:
http://www.cisco.com/en/US/products/ps7220/tsd_products_support_series_home.html
You can use DMPs with the Cisco Digital Media System (DMS). For more information about the DMS,
refer to this URL:
http://www.cisco.com/en/US/products/ps6681/products_documentation_roadmaps_list.html
The DMS uses Digital Media Manager (DMM) software. For more information about DMM software
and DMM appliances, refer to this URL:
http://www.cisco.com/en/US/products/ps6681/tsd_products_support_series_home.html
This section contains the information you need to install and configure the DMP and includes the
following topics:
•
•
•
Connecting the DMP to the System
To connect the DMP to the CTS 1300, complete the following procedure
OL-16441-01
Cisco Digital Media Player, page 5-1
Cisco TelePresence Presentation Codec, page 5-4
Connecting the DMP to the System, page 5-1
Configuring the DMP Video for Use with the CTS 1300, page 5-3
Configuring the DMP Audio for Use with the CTS 1300, page 5-4
5
C H A P T E R
Cisco TelePresence System
5-1