Product features
5.1 Article numbers, properties, accessories
The following system functions of the ET 200SP family remain supported:
● I&M data
● Firmware update
● Maintenance
● PROFIenergy
You will find the descriptions of these functions and also rules and regulations for
commissioning in the ET 200SP System Manual
(https://support.industry.siemens.com/cs/ww/de/view/58649293/en?dl=en).
Accessories of the ET 200SP motor starter
You can order the following accessories separately:
● BaseUnit with width of 30 mm (3RK1908-0AP00-0xx0)
● Labeling strips in various versions:
– 500 units light-gray on a roll (6ES7193-6LR10-0AA0)
– 500 units yellow on a roll (6ES7193-6LR10-0AA0)
– 1000 units light-gray on DIN A4 sheets (6ES7193-6LA10-0AG0)
– 1000 units yellow on DIN A4 sheets (6ES7193-6LA10-0AG0)
● 160 reference identification labels (6ES7193-6LF30-0AW0)
● 3DI/LC module (3RK1908-1AA00-0BP0)
● Fan (3RW4928-8VB00); is already included with all 4-12 A motor starters
● Mechanical bracket for BaseUnit (3RK1908-1EA00-1BP0)
● Cover for an empty BaseUnit (3RK1908-1CA00-0BP0)
● Touch protection for infeed bus (3RK1908-1DA00-2BP0); is already provided with all
BaseUnits with 500 V AC infeed
You can find further information on accessories in the ET 200SP System Manual
(https://support.industry.siemens.com/cs/ww/de/view/58649293/en?dl=en) in the Appendix
"Accessories/spare parts".
See also
Introduction (Page 5)
38
Motor starter (3RK1308‑0**00‑0CP0)
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003