Siemens 3RK1308‑0 00‑0CP0 Series Equipment Manual page 107

Table 6- 8 Input n action
Input Input n level
n action
No action
Trip without restart
Trip with restart
(AUTO RESET)
Trip end position
CW
Trip end position
CCW
Group warning
Emergency start
Motor starter (3RK1308‑0**00‑0CP0)
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003
Input n signal
NO/NC n. ret./ret.
NO/NC n. ret.
NO/NC n. ret.
NO/NC n. ret.
NO/NC n. ret.
NO/NC n. ret./ret.
NO n. ret.
Operating
mode
All No direct action on the motor starter. Evaluation
und further processing possible using the
process image.
All
Results in tripping of the motor.
•
Must be acknowledged once the cause of
•
the tripping has been rectified (initial status).
All
Results in tripping of the motor.
•
Acknowledged automatically after the cause
•
of the trip has been rectified (initial status).
All
The motor is switched off regardless of the
•
direction of rotation.
A fault is generated and reported.
•
The motor can only be switched on with
•
"Motor CCW"
All
The motor is switched off regardless of the
•
direction of rotation.
A fault is generated and reported.
•
The motor can only be switched on with
•
"Motor CW"
All
The diagnosis "Group warning" is output.
•
The motor starter is not switched off.
•
All
Starts the load when an ON command is
•
issued despite the fact that an internal trip
command is present.
Intrinsic device protection of the motor
•
starter remains active and prevents the
device from being destroyed.
Only allowed as a NO contact
•
Not parameterizable when the "EX motor"
•
parameter is active.
Functions
6.11 Inputs
Description
107