Spark Plug - Honda Dream DX CD110 Owner's Manual

SPARK PLUG

Refer to the safety precautions on page 34.
Recommended plugs:
Standard:
CPR7EA-9 (NGK)
NOTICE
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
1. Disconnect the "Spark Plug Cap" (1)
from the spark plug.
2. Clean any dirt from around the spark
plug base. Remove the spark plug
using a spark "Plug Wrench" (2) and
"Spanner" (3) furnished in the tool kit.
(1) Spark Plug Cap
(2) Plug Wrench
(3) Spanner
Honda Motorcycle & Scooter India Pvt. Ltd.
3. Inspect
porcelain for deposits, erosion or carbon
fouling. If the erosion or deposit is
heavy, replace the plug. Clean a carbon
or wet fouled plug with a plug cleaner,
otherwise use a wire brush.
4. Check the "Spark Plug Gap" (4) using a
wire-type feeler gauge. If adjustment is
necessary, bend the "Side Electrode" (5)
carefully.
The gap should be:
(1)
(4) Spark Plug Gap
(5) Side Electrode
(3)
5. Make sure the plug washer is in good
condition.
(2)
the electrodes
0.8–0.9 mm (0.031–0.035 in)
(4)
CD110 Dream DX
and center
(5)
41