Honda Dream DX CD110 Owner's Manual page 51

Chain Case Removal
1. Remove the Bolts (1).
2. Press the Lugs (2).
3. Release all the Claws (5)from both the
chain case covers and carefully remove
them from swingarm
expose the drive chain.
(1)
(1) Bolts
(2) Lugs
(3) Upper Chain Case
(4) Lower Chain Case
(5) Claws
Honda Motorcycle & Scooter India Pvt. Ltd.
assembly
(3)
(5)
(5)
(2)
(4)
4. Inspect the sprocket teeth for possible
wear or damage. Replace if necessary.
Damaged sprocket
Teeth
Replace
to
Normal sprocket Teeth
If the drive
excessive worn or damaged, they should be
replaced. Never use a new chain with worn
sprockets;rapid chain wear will result.
Installation
Lower case
5. First install into the swingarm by
widening the front side of lower case
byhand into the stay on swing arm
cross plate.
6. Fasten the lower case with two bolts.
Upper case
7. Install the upper case into the swingarm
by prefiting all claws of the upper case
with ones of the lower case.
Worn sprocket
Replace
GOOD
chain or sprockets
CD110 Dream DX
Teeth
are
47