Table of Contents
Advertisement
> DL
Direct Playback Settings
Function:
Direct Playback setting
Syntax:
stxDL:a,b,c, .... ,q,r;
a: Card in slot
0 Card in slot A
1 Card in slot B
b - q: Phrase number which you wish to assign to control input pin
b (CH1)
c (CH2)
|
q (CH16)
r: Direct Playback Method
0 Normal playback
1 First-In playback
2 Last-In playback
3 Sequence playback
Example)
stxDL:0,A1, ... ,A3,A4, ... ,A16,0;
The phrases will be assigned to the control input pin as follows; A0001 to CH1,...,A0003
to CH3, A0004 to CH4,..., A0016 to CH16, Direct Playback "Normal playback".
Note:
For unused direct channels, specify " ---- ".
If you specify "PLAY" instead of a phrase, you can playback directly the phrase shown in
the display by the control input pin.
Caution
Direct Playback Settings data will not be written to card.
= CE
Program (Count) Playback Settings
Function:
Program (Count) Playback setting
Syntax:
stxCE:a,b,c,c, .... ,c;
a: Card in slot
0 Card in slot A
1 Card in slot B
b: Program Playback pattern (1 - 5)
c: Phrase number to be played back (up to 100 phrases)
Example)
stxCE:0,1,A1,A2,A3,A4,A5;
This registers A0001, A0002, A0003, A0004 and A0005 into the Program Playback
pattern 1 of card A.
|
R Ver.2.01 R
AR-3000
S-232C Reference - 31
Advertisement
Table of Contents
