Playing Back Phrases Assigned To The Connectors (Direct Playback); Connecting External Devices; Operational Specifications For Direct Playback (Last-In) - Roland AR-200R Owner's Manual

Controlling the AR-200R from an External Device (Control Input Connectors)
Assigning Phrases to the Terminals
Assign phrases 1 through 9 to Port Nos. 1 through 9.
Settings in Effect When a Card Is Formatted
fig.inp-13
Port No. 1 2 3
Phrase 0001 0002 0003
Playing Back Phrases
Assigned to the Connectors
(Direct Playback)
What Is Direct Playback (Reverse Priority)?/Use and
Applications
By inputting control signals directly to Port Nos. 1 through 9,
you can play back the phrases assigned to those numbers. Up
to 9 phrases can be played back. Assign phrases 1 through 9
beforehand to Port Nos. 1 through 9.
This is very convenient when you want to specify a desired
phrase directly using a switch, relay, sensor, or other such
means.
fig.inp-08
1 2 3
Port No.
Phrase 0001 0002 0003

Connecting External Devices

Connectors Used for Direct Play (Last-In)
(Control I/O Connector)
1 through 9: Inputting a control signal directly to the
connector with the number corresponding to the phrase
starts playback of the phrase.
"10 (STOP)": Stop phrase playback.
In addition to the connectors just described, shorting the
"11/12 (GND)" (ground) connectors enables "On."
fig.inp-09
Select a Phrase
STOP
10 9 1
12 11
COM
* Control Input and DC Input Terminal (CONTROL A) "1, 2"
are connected in parallel with Control I/O Connector (Control
B) "1, 2."
30
4 5 9
0004 0005 0009
9
4 5
0004 0005 0009
COM
1 2
"Important Notes on Making Connections and Switching
the Power On and Off" (p. 9)
Operational Specifications for
Direct Playback (Last-In)
Basic Operation of Direct Playback (Reverse
Priority)
fig.inp-10
Port No. 1
Port No. 2
STOP Port
0002
AUDIO OUTPUT
Playback:
Input control signals to Port Nos. 1 through 9.
→ This plays the phrase assigned to the connector.
stopping:
Input control signals to Port No. 10 (STOP).
→ This stops playback of the phrase.
"Operational Specifications for Control Input Playback"
(p. 28)
Priority Order
The most recently input control signal is given priority in
playback.
If a new and different control signal is input during playback
of a phrase, playback of the current phrase is stopped, and
playback of the specified phrase then begins.
fig.inp-11
Port No. 1
Port NO.2
0001
AUDIO OUTPUT
0001 Interrupt
Playback is repeated while the control signal is continuously
input.
fig.inp-12
Port No.1
0001
AUDIO OUTPUT
0001
0001 Interrupted
0002
0001 0001