Pu Pattern Phrase Setting Output; Ps Pattern Phrase Setting Output; Ss Song Phrase Setting Output - Roland AR-3000R Owner's Manual

< PU Pattern Phrase Setting Output
Function: Pattern Phrase setting output
Syntax:
stxPU:a,b,c,d, .... ,c,d;
a: Pattern Phrase number
b: Pattern Phrase Playback mode
0 Sequence
1 Random
c: Phrase number to be played back (A1-A1000,B1-B1000)
d: Delay Time (00S0 - 59S9)
Note: refer to 2Q command
> PS Pattern Phrase Setting Output
Function: Pattern Phrase setting output
Syntax:
stxPS:a,b,c,d,e,f,g, .... ,d,e,f,g;
a: Pattern Phrase number
b: Pattern Phrase Playback mode
0 Sequence
1 Random 1
2 Random 2
3 Random 3
c: Interrupt phrase interval
(Sequence/Random 1:0, Random 2/3: 1-25)
d: Playback Sequence
e: Phrase number to be played back (A1-A1000,B1-B1000)
f: Playback Volume (10 - 100 : 10% - 100%)
g: Delay Time (0S0 - 59S9)
Note: refer to 3Q command
> SS Song Phrase Setting Output
Function: Song Phrase setting output
Syntax:
stxSS:a,b,c,b,c, .... ,b,c;
stxSS:a,b,c,b,c, .... ,STOP,c;
a: Song Phrase number
b: Phrase number to be played back / STOP (To specify the ending point)
c: Start point of phrase / End point of song phrase
(0H00M00S00F - 23H59M59S**F)
Note: refer to GQ command
The number of digits for **F (frame) increases according to the value of MTC type.
R Ver.2.01 R
AR-3000 S-232C Reference - 42