Py Delay Time Settings; Pp Playback Point Settings; Pr Phrase Repeat Settings; Lp Loop Play Settings - Roland AR-3000R Owner's Manual

> PY Delay Time Settings
Function: Delay Time settings
Syntax:
stxPY:a,b;
a: Phrase number
b: Delay Time (0S0F - 59S**F)
Note: The number of digits for **F (frame) increases according to the value of MTC type.
> PP Playback Point Settings
Function: Playback Point settings
Syntax:
stxPP:a,b,c;
a: Phrase number
b: Start (0H0M0S0F0S - 23H59M59S**F9S)
c: End (0H0M0S0F0S - 23H59M59S**F9S)
Note: The number of digits for **F (frame) increases according to the value of MTC type.
Caution: The AR-3000R cannot respond to this command during crossfades, repeats or
intervals.
> PR Phrase Repeat Settings
Function: Phrase Repeat settings
Syntax:
stxPR:a,b,c,d;
a: Phrase number
b: Repeat
0 OFF
1 ON
c: The number of repetitions
0 ENDLESS
1 1
| |
99 99
d: Repeat interval (0M0S - 59M59S)
> LP Loop Play Settings
Function: Loop Play settings
Syntax:
stxLP:a,b,c,d,e;
a: Phrase number
b: Loop Play
0 OFF
1 ON
c: The number of loops
0 ENDLESS
1 1
| |
99 99
d: Loop 1 position
e: Loop 2 position
Note: The number of digits for **F (frame) increases according to the value of MTC type.
Caution The command is not compatible with pattern phrases and song phrases.
The command is not compatible with audio phrases recorded in Mode 2.
(0H0M0S0F0S - 23H59M59S**F9S)
(0H0M0S0F0S - 23H59M59S**F9S)
R Ver.2.01 R
AR-3000 S-232C Reference - 23