Playing Back Phrases Assigned To The Connectors (Direct Playback) - Roland AR-200 Owner's Manual

Roland owner's manual audio recorder ar-200
Table of Contents

Advertisement

Controlling the AR-200 from an External Device (Control Input Connectors)
Playing Back Phrases
Assigned to the Connectors
(Direct Playback)
What Is Direct Playback (Reverse Priority)?/Use and
Applications
By inputting control signals directly to Port Nos. 1 through 9,
you can play back the phrases assigned to those numbers. Up
to 9 phrases can be played back. Assign phrases 1 through 9
beforehand to Port Nos. 1 through 9.
This is very convenient when you want to specify a desired
phrase directly using a switch, relay, sensor, or other such
means.
fig.inp-08
Port No.
1
2
3
Phrase
0001
0002
0003
Connecting External Devices
Connectors Used for Direct Play (Last-In)
(Control I/O Connector)
1 through 9: Inputting a control signal directly to the
connector with the number corresponding to the phrase
starts playback of the phrase.
"10 (STOP) ": Stop phrase playback.
In addition to the connectors just described, shorting the
"11/12 (GND)" (ground) connectors enables "On."
fig.inp-09
STOP
10
9
12 11
GND
"Important Notes on Making Connections and Switching
the Power On and Off" (p. 9)
30
9
4
5
0004
0005
0009
Select a Phrase
1
Operational Specifications for
Direct Playback (Last-In)
Basic Operation of Direct Playback (Reverse
Priority)
fig.inp-10
Port No. 1
Port No. 2
STOP Port
0002
AUDIO OUTPUT
Playback:
Input control signals to Port Nos. 1 through 9.
→ This plays the phrase assigned to the connector.
stopping:
Input control signals to Port No. 10 (STOP).
→ This stops playback of the phrase.
"Operational Specifications for Control Input Playback"
(p. 28)
Priority Order
The most recently input control signal is given priority in
playback.
If a new and different control signal is input during playback
of a phrase, playback of the current phrase is stopped, and
playback of the specified phrase then begins.
fig.inp-11
Port No. 1
Port NO.2
0001
AUDIO OUTPUT
0001 Interrupt
Playback is repeated while the control signal is continuously
input.
fig.inp-12
Port No.1
0001
AUDIO OUTPUT
0001
0001 Interrupted
0002
0001
0001

Advertisement

Table of Contents
loading

Table of Contents