Preparing Installation Files; Preparing Needed Tools; Choosing The Installation Site - Avaya P332MF Quick Start Manual

Before you Start

Preparing Installation Files

Ensure that you load the latest versions of the firmware file for the P330. You can download the
firmware file needed for your installation from the Avaya Support Web site, at
support.avaya.com.

Preparing Needed Tools

Prepare the tools you need to mount the P330, according to the
Table 1: Mounting Tools
If you need to mount on...
Rack

Choosing the Installation Site

Ensure that the location where you install your P330 fulfills the following requirements:
Cables are away from sources of electrical noise such as:
●
radio transmitters
●
broadcast amplifiers
●
power lines
●
fluorescent light fixtures
●
Water or moisture cannot enter the chassis.
●
Air can flow freely around all sides of the chassis.
●
The vents on the sides of the chassis are not blocked.
●
6 Quick Start for Hardware Installation: P332MF Stackable Switch
Prepare these tools
Phillips head screwdriver
http://
Table 1: