Device Manager
Configuring the Device Manager
You can configure several Device Manager parameters using the CLI. These parameters
include the time-out and retries parameters, the location of the Web server that provides the
help files for the Device Manager, and the Java plug-in required for running the Device
Manager.
Device Manager Commands
The following Device Manager commands are available.
In order to...
Set the SNMP retries parameter
Set the SNMP time-out parameter
Set the location of the Web server
with the help files and the Java
plug-in
Display the SNMP retries parameter
Display the SNMP time-out
parameter
Display the URL of the Web server
with the help files and the Java
plug-in
Running the Device Manager
Note:
You should assign an inband or out-of-band interface IP address to the switch
Note:
before beginning this procedure.
To run the Device Manager:
1. Open your browser.
2. Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.
30 Quick Start for Hardware Installation: P332MF Stackable Switch
Use the following command...
set snmp retries
set snmp time-out
set web aux-files-url
show snmp retries
show snmp time-out
show web aux-files-url