Siemens SINAMICS SM150 Operating Instructions Manual page 136

Maintenance
9.5 Repair
3. Remove the SD card from the data slot.
4. Release the cables
5. Remove the screws
6. Fit a new operator panel. Fasten the operator panel.
7. Connect the cables.
136
Figure 9-7 Remove the operator panel.
②
①
operator panel from the cabinet door towards the front.
at the operator panel.
(9 x) of the fastening clips. Remove the mounting clips. Withdraw the
SINAMICS SM150 6SL3845-7NN42-2AA3 HBIS Shigang WRM NTM
Operating Instructions Rev.202003051222 3005356504