Vacuum Tubes; Tools Needed; Operation - Ryobi RBV254O Original Instructions Manual

VACUUM TUBES

The vacuum tubes can be installed on the
blower/vacuum without using any tools.
ASSEMBLY
UNPACKING
The product requires assembly.
■ Carefully remove the product and any
accessories from the box. Make sure
that all items listed on the packing list are
included.
WHAT'S IN THE BOX
See page 14.
■ Blower/Vacuum x 1
■ Upper blower tube x 1
■ Sweeper nozzle x 1
Leaf nozzle x 1
■
Upper vacuum tube x 1
■
■ Lower vacuum tube x 1
■ Phillips head screws x 2
■ Vacuum bag adaptor x 1
■ Vacuum bag x 1
■ 2-cycle engine lubricant x 1
Operator's manual x 1
■

TOOLS NEEDED

The following tools are not included in the
package but are needed for the assembly or

operation:

■ Socket wrench
■ Flat head screwdriver
■ Phillips head screwdriver
WARNING
Do not use the product if any parts on the
"What's in the box" are already assembled
when you first open the box. The parts on the
list are not assembled by the manufacturer
and require customer installation. Use of
a product that may have been improperly
assembled could result in serious personal
injury.
■ Carefully inspect the product to make sure
no breakage or damage occurred during
shipping.
8
■ Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
■ If any parts are damaged or missing,
please call your RYOBI service centre for
assistance.
WARNING
If any parts are damaged or missing, do
not operate the product until the parts are
replaced. Use of the product with damaged
or missing parts could result in serious
personal injury.
WARNING
Do not attempt to modify the product or
create accessories not recommended for
use with the product. Any such alteration
or modification is misuse and could result
in a hazardous condition leading to possible
serious personal injury.
WARNING
Rotating impeller blades can cause severe
injury. Always stop the engine and ensure
impeller blades have stopped rotating
before opening the vacuum door or
installing/changing tubes. Do not put hands
or any other object into the vacuum tubes
while they are installed on the unit.
OPERATION
WARNING
Do not allow familiarity with tools to make
you careless. Remember that a careless
fraction of a second is sufficient to inflict
serious injury.
WARNING
Always wear eye protection with side
shields marked to comply with standards,
along with hearing protection. Failure to do
so could result in serious injuries such as
objects being thrown into your eyes.