Ryobi RBV254O Original Instructions Manual page 30

OPERATION
USING THE VACUUM
1. Unzip the vacuum bag and place the
adaptor inside. Push the vacuum bag
adaptor through the opening opposite
the zipper. The wider end of the adaptor
will remain on the inside of the vacuum
bag when installed properly.Twist to lock
into place.
2. Align the raised slots on the vacuum bag
adaptor with the raised locking tabs on
the blower housing outlet; push the bag
adaptor onto the housing. Twist to lock
into place.
3. Depress door tab using a flat head
screwdriver. Open vacuum inlet door.
4. Align the raised locking tabs of the lower
vacuum tube with the matching slots on
the upper vacuum tube. Using a Phillips
head screwdriver, tighten the two screws
to secure the vacuum tubes together.
30
1
2
3
1
2
4
2
2
1
1