Ryobi RBV254O Original Instructions Manual page 29

OPERATION
USING THE BLOWER
1. Align raised tabs on upper blower tube
with the slots on blower housing outlet.
Attach and tighten securely by turning
clockwise until it clicks into place.
2a. Align raised tabs on upper blower tube
with the slots on the leaf nozzle. Attach
and tighten securely by turning clockwise
until it clicks into place.
2b. Align raised tabs on upper blower tube
with the slots on the sweeper nozzle.
Attach and tighten securely by turning
clockwise until it clicks into place.
NOTE: Hold blower as shown, so the air
stream can work close to the ground.
NOTE: Ensure to attach the blower
tube and nozzle securely to the blower/
vacuum housing.
1
2
2a
2
1
2b
2
1
1
29