Ryobi RBV254O Original Instructions Manual page 25

OPERATION
EASY START COLD ENGINE
1. Install the starter bit into the electrical
starter with the triangle bit facing
outside. Push the F/R button to the right
until the triangle symbol ( ) shows on
the F/R button.
2. Install the battery. An audible click is
heard when the battery is secured to the
electrical starter.
WARNING: The electrical starter is
equipped with a safety interlock. Do
not press and hold on the starter button
when putting the electrical starter drive
shaft into the blower starter housing. The
starter will not start if the electrical starter
is not properly engaged.
3. Press the primer bulb 8 times.
1
2
1
2
3
8 10
25