Ryobi RBV254O Original Instructions Manual page 28

OPERATION
4. Squeeze the throttle trigger. Pull the
throttle lock backward.
5. Hold the product with one hand and use
your other hand to insert the starter drive
shaft into the blower starter housing.
Make sure the starter bit is properly
engaged. Press and hold the electrical
starter switch button until the engine
attempts to start. Do not press the
electrical starter switch button for more
than 4 seconds.
6. To stop the engine, toggle the on/off
switch to the "STOP" position.
28
4
5
1
6
2
1
2
4s 4s