Table of Contents
Advertisement
Analog output (AO)
* This function is an option.
AO output function
Function to externally output the PV, SV, or MV value with DC1~5V
signals. AO output can be scaled.
Operating procedure
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
(AO output type)
(scale high limit)
(scale low limit)
Parameter to be used
Set the parameter
the desired output signal type.
Set the parameters
and
values (%) corresponding to the 5V
and 1V output respectively of AO.
(Percentage against the input
range is set when the signal type is
PV or SV, the % value with respect
to the input range is set.)
65
to
Measured Value
Setting Value
Manipulated Value
to the signal type
Advertisement
Table of Contents
