Making Settings When You Connect An External Phone Device - Epson ET-M3140 Series User Manual

User's Guide
Related Information
"Making Settings to Use an Answering Machine" on page 48
&
"Usage of Manual Mode" on page 47
&

Making Settings When You Connect an External Phone Device

Making Settings to Use an Answering Machine
You need settings to use an answering machine.
1. Select Settings on the home screen on the printer's control panel..
2. Select General Settings > Fax Settings > Basic Settings.
3. Set Receive Mode to Auto.
4. Set the Rings to Answer setting of the printer to a higher number than the number of rings for the answering
machine.
If Rings to Answer is set lower than the number of rings for the answering machine, the answering machine
cannot receive voice calls to record voice messages. See the manuals that came with the answering machine for
its settings.
The printer's Rings to Answer setting may not be displayed, depending on the region.
Related Information
"Usage of Auto Mode" on page 47
&
"Basic Settings Menu" on page 53
&
Making Settings to Receive Faxes Operating Only a Connected Phone
(Remote Receive)
You can start receiving incoming faxes by only picking up the handset and operating the phone, without operating
the printer at all.
The Remote Receive feature is available for telephones that support tone dialing.
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings > Remote Receive.
3. Tap Remote Receive to set this to On.
4. Select Start Code, enter a two digit code (you can enter 0 to 9, *, and #), and then tap OK.
5. Select OK to apply the settings.
Related Information
"Usage of Manual Mode" on page 47
&
Fax Settings
48