Cannot Send Faxes; Cannot Send Faxes To A Specific Recipient; Cannot Send Faxes At A Specified Time - Epson ET-M3140 Series User Manual

User's Guide
"Uninstalling Applications" on page 139
&
"Installing Applications" on page 138
&

Cannot Send Faxes

❏ Set up the header information for outgoing faxes on the control panel. Some fax machines automatically reject
incoming faxes that do not include header information.
❏ If you have blocked your caller ID, unblock it. Some phones or fax machines automatically reject anonymous
calls.
❏ Ask the recipient if the fax number is correct and the recipient's fax machine is ready to receive a fax.
Related Information
"Basic Settings Menu" on page 53
&
"Cannot Send or Receive Faxes" on page 167
&

Cannot Send Faxes to a Specific Recipient

Check the following if you cannot send faxes to a specific recipient due to an error.
❏ If the recipient machine does not pick up your call within 50 seconds after the printer has finished dialing, the
call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If
it takes more than 50 seconds, add pauses after the fax number to send the fax. The
A hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
❏ If you have selected the recipient from the contacts list, verify that the registered information is correct. If the
information is correct, select the recipient from the contacts list, tap
Communication Mode to Slow(9,600bps).
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 94
&
"Managing Contacts" on page 33
&
"Cannot Send or Receive Faxes" on page 167
&

Cannot Send Faxes at a Specified Time

Set the date and the time correctly on the control panel.
Related Information
"Sending Faxes at a Specified Time (Send Fax Later)" on page 95
&
"Basic Settings Menu" on page 53
&
Solving Problems
169
is used to enter pauses.
> Edit, and then change Fax