Table of Contents
Advertisement
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the
MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
2.
Enter a simple description of the wireless station in the Description field. For
example: Wireless station A.
3.
Privilege - Selects the privileges for this entry, one of Allow / Deny / 64-bit / 128-bit
/ 152-bit.
4.
WEP Key - If you select 64-bit, 128-bit or 152-bit in the Privilege field, enter any
combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For
example: 2F34D20BE2.
5.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
6.
Click the Save button to save this entry.
To add additional entries, repeat steps 1-6.
Note: When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.
To modify or delete an existing entry:
1.
Click the Edit or Delete button in the Modify column in the MAC Address Filtering
Table.
2.
Enter the value as desired in the Add or Modify Wireless MAC Address Filtering
entry page, and click the Save button.
You can click the Enable All button to make all the entries effective, click the Disable All
button to make all the entries ineffective, click the Delete All button to delete all the
entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
For example: If you desire that the wireless station A with MAC address
00-0A-EB-00-07-BE be able to access the router, the wireless station B with MAC
address 00-0A-EB-00-07-5F not be able to access the router, and the wireless station C
with MAC address 00-0A-EB-00-07-8A be able to access the router when its WEP key is
2F34D20BE2E54B326C5476586A, while all other wireless stations cannot access the
router, you should configure the Wireless MAC Address Filtering list following these
steps:
1. Click the Enable button to enable this function.
2. Select the radio button: Deny the stations not specified by any enabled entries in
the list to access for Filtering Rules.
3. Delete all or disable all entries if there exist any entries already.
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the
MAC Address field, enter wireless station A in the Description field, select Allow in
the Privilege pull-down list and select Enabled in the Status pull-down list. Click the
Save and the Return button.
5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the
TL-WR641G
108M Wireless Router User Guide
- 24 -
Advertisement
Table of Contents
