Ip Address Filtering - TP-Link TL-WR641G User Manual

108mbps wireless router
Hide thumbs Also See for TL-WR641G:
Table of Contents

Advertisement

Enable Domain Filtering - set Domain Filtering is enabled or disabled.
Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can
select the default filtering rules of MAC Address Filtering, either Allow or Reny
accessing the router.

5.8.2 IP Address Filtering

The IP address Filtering feature allows you to control Internet Access by specific users
on your LAN based on their IP addresses. The IP address filtering are set on this page,
figure 5-25:
To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up
an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on
the Firewall page, and click the Add New... button. The page " Add or Modify an IP
Address Filtering entry " will appear shown in figure 5-26:
Figure 5-26 Add or Modify an IP Address Filtering Entry
To create or modify an IP Address Filtering entry, please follow these instructions:
1.
LAN IP Address - type a LAN IP Address or a range of LAN IP addresses in the
field, in dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30.
Keep the field open, which means all LAN IP Addresses have been put into the field.
2.
LAN Port - type a LAN Port or a range of LAN ports in the field. For example, 1030 -
2000. Keep the field open, which means all LAN ports have been put into the field.
TL-WR641G
108M Wireless Router User Guide
Figure 5-25 IP address Filtering
- 35 -

Advertisement

Table of Contents
loading

Table of Contents