Security; Firewall - TP-Link TL-WR641G User Manual

108mbps wireless router
Hide thumbs Also See for TL-WR641G:
Table of Contents

Advertisement

5.8 Security

Figure 5-23 the Security menu
There are six submenus under the Security menu (shown in figure 5-23): Firewall, IP
Address Filtering, Domain Filtering, MAC Filtering, Remote Management and
Advanced Security. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided
below.

5.8.1 Firewall

Using the Firewall page (shown in figure 5-24), you can turn the general firewall switch
on or off. The default setting for the switch is off. If the general firewall switch is off, even
if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are
ineffective.
Enable Firewall - the general firewall switch is on or off.
Enable IP Address Filtering - set IP Address Filtering is enabled or disabled.
There are two default filtering rules of IP Address Filtering, either Allow or Reny
passing through the router.
TL-WR641G
108M Wireless Router User Guide
Figure 5-24 Firewall Settings
- 34 -

Advertisement

Table of Contents
loading

Table of Contents