Upnp - TP-Link TL-WR641G User Manual

108mbps wireless router
Hide thumbs Also See for TL-WR641G:
Table of Contents

Advertisement

To assign a computer or server to be a DMZ server:
1.
Click the Enable radio button
2.
Enter the local host IP Address in the DMZ Host IP Address field
3.
Click the Save button.
Note: After you set the DMZ host, the firewall related to the host will not work.

5.7.4 UPnP

The Universal Plug and Play (UPnP) feature allows the devices, such as Internet
computers, to access the local host resources or devices as needed. UPnP devices can
be automatically discovered by the UPnP service application on the LAN. You can
configure UPnP on this page that shown in figure 5-22:
Enable UPnP - UPnP can be enabled or disabled by clicking the Enable or
Disable button. As allowing this may present a risk to security, this feature is
disabled by default.
Current UPnP Settings Table - this table displays the current UPnP information.
App Description – The description provided by the application in the UPnP
request
External Port - External port, which the router opened for the application.
Protocol - Which type of protocol is opened.
Internal Port - Internal port, which the router opened for local host.
IP Address - The UPnP device that is currently accessing the router.
Status - Either Enabled or Disabled, "Enabled" means that port is still active,
otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.
TL-WR641G
108M Wireless Router User Guide
Figure 5-22 UPnP Settings
- 33 -

Advertisement

Table of Contents
loading

Table of Contents