Table of Contents
Advertisement
There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page
in the router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power. Second,
press and hold the default reset button then turn on the router's power, until the
system LED lights up (about 3 seconds). Last, release the reset button and wait
for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
WAN RJ45 port for connecting the router to a cable, DSL modem or Ethernet
Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs
AC power socket: only use the power adapter supplied with the TL-WR641G
108Mbps Wireless Router, use of a different adapter may result in product damage.
TL-WR641G
108M Wireless Router User Guide
WAN
1
2
RESET
Figure 2-2 Rear Panel sketch
- 5 -
3
4
Advertisement
Table of Contents
