Panel Layout; The Front Panel; The Rear Panel - TP-Link TL-WR641G User Manual

108mbps wireless router
Hide thumbs Also See for TL-WR641G:
Table of Contents

Advertisement

Built-in NAT and DHCP server supporting static IP address distributing
Supports Virtual Server, Port Triggering, and DMZ host
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering
Supports TCP/IP, PPPoE, DHCP, ICMP, NAT
Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through
Supports Traffic Stat.
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter
Ignores Ping packets from WAN or LAN ports
Supports firmware upgrade
Supports Remote and Web management

2.3 Panel Layout

2.3.1 The Front Panel

The front panel of the TL-WR641G consists of several LED indicators, which is designed
to indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the
front panel of the router.
Name
Not lit
Power
Lit up
Lit up
System
Flashing
Not lit
Not lit
Lit up
Link/Act
Flashing
Not lit
WLAN
Flashing

2.3.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)
Wireless antenna
Factory Default Reset button
TL-WR641G
Figure 2-1 Front Panel sketch
Action
No Power
Power on
The router is initialising
The router is working properly
The router has a hardware error
There is no device linked to the corresponding port
There is a device linked to the corresponding port but
no activity
There is an active device linked to the corresponding
port
The Wireless Radio function is disabled
The Wireless Radio function is enabled
Table 2-1 The LEDs description
108M Wireless Router User Guide
Description
- 4 -

Advertisement

Table of Contents
loading

Table of Contents