Paper Out Signal (Output) Mode Setting - Epson CW-C6000 Series Technical Reference Manual

Paper out signal (output) mode setting

[Format]
^S(CNA,P,c
[Parameter] c
Description
c = Mode setting
[Function]
This sets the paper out signal mode setting.
Value for parameter c
D/0
1
E/2
[Initial value]
0
[Examples of command transmissions]
The paper out signal is set to the mode that is high in the normal status, and low when there is no paper.
The ^JUS command must be used to save the settings to the non-volatile memory in the printer.
An example of the command transmission is shown below. It is sent via USB or Ethernet from the computer.
^XA
^S(CNA,P,1
^JUS
^XZ
D/E/0/1/2
Turns the paper out signal (pin 25) OFF (not output).
Sets the paper out signal (pin 25) as follows: Normal: High, When there is no paper: Low.
Sets the paper out signal (pin 25) as follows: Normal: Low, When there is no paper: High.
Definition range
Description
Chapter 3 Commands
3
31