Epson CW-C6000 Series Technical Reference Manual page 19

Command
No.
name category
11 External I/O input
signal settings
12
13
14
15
16
Command function
Pause signal mode setting
H e a d c l e a n i n g s i g n a l m o d e
setting
Clogged nozzle check signal mode
setting
Feed signal mode setting
Mode setting for start print signal
Mode setting for re-print signal
Command and parameters
^S(CNI,P,c
c= 0/1
0: Ignore pause signal.
1: Switch the pause state if Low is asserted
for the pause signal for 20 msec or longer.
^S(CNI,C,c
c= 0/1
0: Ignore cleaning signal.
1: Clean if Low is asserted for the cleaning
signal for 20 msec or longer.
^S(CNI,D,c
c= 0/1
0: Ignore clogged nozzle check signal.
1: Check for clogged nozzle if Low is
asserted for the clogged nozzle check sig-
nal for 20 msec or longer.
^S(CNI,F,c
c= 0/3
0: Ignore feed label signal.
1: Continue feeding the label as long as Low
is asserted.
^S(CNI,S,c
c= 0/1/3
0: Ignore start print signal. (Normal print
mode in which the printer receives and
prints data, without using the start print
signal input to the external I/O.)
1: Issue a label if Low is asserted for the start
print signal for 20 msec or longer.
3: Continue issuing labels as long as Low is
asserted for the start print signal.
^S(CNI,R,c
c= 0/1
0: Ignore reprint label signal.
1: Reprint the previously printed label if Low
is asserted for the reprint label signal for
20 msec or longer.
Chapter 3 Commands
3
19