Ink Low Signal (Output) Mode Setting - Epson CW-C6000 Series Technical Reference Manual

Ink low signal (output) mode setting

[Format]
^S(CNA,J,c
[Parameter] c
Description
c = Mode setting
[Function]
This sets the ink low signal mode setting.
Value for parameter c
D/0
1
E/2
[Initial value]
0
[Examples of command transmissions]
The ink low signal is set to the mode that is high in the normal status, and low when there is little ink remaining.
The ^JUS command must be used to save the settings to the non-volatile memory in the printer.
An example of the command transmission is shown below. It is sent via USB or Ethernet from the computer.
^XA
^S(CNA,J,1
^JUS
^XZ
D/E/0/1/2
Turns the ink low signal (pin 8) OFF (not output).
Sets the ink low signal (pin 8) as follows: Normal: High, When there is little ink remaining:
Low.
Sets the ink low signal (pin 8) as follows: Normal: Low, When there is little ink remaining:
High.
Definition range
Description
Chapter 3 Commands
3
29