Checking The Transaxle-Fluid Level; Changing The Transaxle Fluid - Toro Workman 07235 Operator's Manual

Mdx
Hide thumbs Also See for Workman 07235:
Table of Contents

Advertisement

Checking the
Transaxle-Fluid Level
Service Interval: Every 100 hours
Fluid Type: SAE 10W30 (API service SJ or higher)
1.
Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
2.
Remove the bolt from the level-indicating hole
(Figure
58).
Note:
The transaxle fluid level should be at the
bottom of the level indicator hole.
Figure 58
1. Level-indicator hole
3.
If the transaxle fluid is not level with the bottom
of the level indicating hole, fill the reservoir
with the specified fluid; refer to
Transaxle Fluid (page
Changing the Transaxle
Fluid
Service Interval: Every 800 hours/Yearly (whichever
comes first)
Fluid Type: SAE 10W30 (API service SJ or higher)
Fluid Capacity: 1.4 L (1.5 US qt)
1.
Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
2.
Wipe the area around the fill and drain plugs
clean with a rag
(Figure
g002082
Changing the
47).
59).
1. Drain plug
3.
Align a drain pan with a capacity of 2 L (2.1 qt)
or more under the drain plug.
4.
Remove the fill plug by rotating it
counterclockwise
Note:
Retain the fill plug and gasket for
installation in step 8.
5.
Remove the drain plug by rotating it
counterclockwise
Note:
Retain the drain plug and gasket for
installation in step 6.
Note:
Allow the fluid to drain from the transaxle
completely.
6.
Install and tighten the drain plug and gasket into
the drain-plug hole of the transmission
59).
Note:
Dispose of the used fluid at a certified
recycling center.
7.
Fill the reservoir
hole with approximately 1.4 L (1.5 US qt) of
the specified fluid or until the fluid level in the
transmission is even with the bottom of the
threads.
(Figure
1. Fluid fill
8.
Install and tighten the fill plug and gasket into
the fill-plug hole of the transmission
9.
Start the engine and operate the machine.
47
Figure 59
2. Fill plug
(Figure
59).
(Figure
59).
(Figure
60) through the fill-plug
59).
Figure 60
(Figure
g002109
(Figure
g004048
59).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 07235tc

Table of Contents