Changing Volume Presettings (Volume Settings); Changing The Volume Presetting; Of Traffi C Announcements; (Traffi C Volume) - Blaupunkt MEMPHIS MP66 7 646 520 310 Operating And Installation Instructions

Changing volume presettings ( Volume Settings)
In the "Volume Settings" menu, select the volume presettings for traf-
fi c announcements, the telephone, the signal tones, etc.
➔
Press the MENU button
➔
Press the softkey
The "Volume Settings" menu appears. The volume presettings are
displayed as two-digit numbers. One of the two menu items "On Vol-
ume" or "Last Volume" is highlighted.
Traf Volume
15
Phone Volume
25
Beep Volume
03

Changing the volume presetting

of traffi c announcements ( Traffi c
Volume)
If the device puts a traffi c an-
nouncement through, you hear it
at the preset volume.
➔
Press the softkey
"Traffi c Volume").
The volume presetting for traf-
fi c announcements appears.
➔
Adjust the desired volume
using the volume control
or the rocker switch
ments 1 to 50).
Changing basic settings in the settings menu
?
. The settings menu appears.
9
(next to "Volume Settings").
Volume Settings
Traffic Volume 15
Phone Volume 25
Beep Volume 03
7
(next to
5
3
(incre-
Volume
On Volume 10
Last Volume
If a traffi c announcement is
broadcast, the device automat-
ically puts it through at this
volume. During the traffi c an-
nouncement, you can always
change the volume by means of
the volume control
Changing the volume presetting
of the telephone ( Phone Volume)
If the device puts a phone call
through, it always starts at the pre-
set volume.
➔
Press the softkey
"Phone Volume").
On Volume
10
Last Volume
Last Volume active
5
.
8
(next to
115