u
Switch between the settings with the
rocker switch or
•
"OFF CLK"
•
"OFF CLK"
u
Press the OK button
ferent function, or press the DIS•ESC
;
button
to exit the menu.
Selecting 12h/24h time display
(CLK MODE )
The time can be displayed using the 12-hour
or 24-hour format.
u
In the System menu, press the rocker
:
switch
or
"CLK MODE" menu item is selected.
u
Press the OK button
menu item.
u
Use the rocker switch
lect the setting "12 HR AM", "12 HR PM"
or "24 HR MODE".
u
Press the rocker switch
on the selected setting.
u
Press the OK button
ferent function, or press the DIS/ESC
;
button
to exit the menu.
Setting the time (CLK SET)
u
In the System menu, press the rocker
:
switch
or
"CLK SET" menu item is selected.
u
Press the OK button
menu item.
The time is displayed.
u
Select the hours or minutes with the
rocker switch or
:
.
: Time display is on.
: Time display is off.
2
to select a dif-
repeatedly until the
2
to call up the
:
or
to se-
:
to switch
2
to select a dif-
repeatedly until the
2
to call up the
:
.
u
Enter the desired digit by pressing the
corresponding button of the keys
After entering the complete time,
u
press the OK button
time entered.
Note:
To fi nish the entry without changing the
time, press the DIS•ESC button
Changing volume presettings
The following presettings can be changed in
the System menu:
•
Power-on volume (ON VOL)
•
Volume presettings of traffi c announce-
ment (TA VOL), telephone/navigation
announcement (TEL VOL) and volume
reduction (MUTE VOL)
•
Signal tone (BEEP ON)
•
Speed-dependent volume increase
(AUTO SND)
Adjusting power-on volume (ON VOL /
LAST VOL )
To adjust the power-on volume,
u
in the System menu, press the rocker
:
switch
or
"ON VOL" menu item is selected.
u
Press the OK button
menu item.
The current power-on volume is displayed.
u
Set the power-on volume with the rock-
er switch or
User settings
9
2
to store the
;
.
repeatedly until the
2
to call up the
:
.
125
.