Table of Contents
Advertisement
Changing basic settings in the settings menu
selected folder with the BMP
fi les of the animation.
The "Picture Download" menu
appears.
➔
Press the softkey next to the
image or the animation to be
replaced.
•
"Clock" replaces the wallpa-
per which appears if the ra-
dio is switched off and the
vehicle ignition is switched
on,
•
"Minimal Mode" replaces the
screen saver,
•
"Aux" replaces the wallpaper
which appears if "AUX" is se-
lected as audio source.
A progress bar illustrates the
transfer of the fi le. As soon as
the fi le has been transferred,
the display of the active au-
dio source appears. Your image
or animation now replaces the
factory setting.
Adjusting the display viewing
angle (Angle)
The angle at which the driver
looks at the display is depend-
ent upon, among other things,
the installation position of the de-
vice, the seating position, and the
physical size of the driver. You
can adjust the display contrast to
your viewing angle as follows.
114
➔
Press the softkey
"Angle").
The "Angle" menu opens and
the current display contrast is
shown.
➔
On the rocker switch
press
or
to increase the
display contrast.
➔
On the rocker switch
press
or
to decrease the
display contrast.
You can adjust the display con-
trast in 13 increments from
–6 to +6.
:
(next to
3
,
3
,
Advertisement
Table of Contents
