Advertisement
TA {traffic information)
{only for reception area EUROPE)
Only possible in FM radio mode and with RDS
function switched on: Switching priority for traffic
announcements on or off. Settings: ON, OFF.
...- Press the rotary/pushbutton @ to change
the setting.
...- Turn the rotary/pushbutton @ to change
between the settings.
If priority is switched on for traffic information, the
display shows the@ symbol.
PTY {programme type)
{only for reception areas EUROPE and NORTH
AMERICA)
Only possible with activated RDS function: Select
a programme type.
...- Press the rotary/pushbutton @ to show the
programme types.
...- Turn the rotary/pushbutton @ to select a
programme type.
DX/LO {sensitivity)
Setting the sensitivity of station seek tuning. Set-
tings: OX (stations with strong and weaker signals
are found), LO (only stations with a strong signal
are found).
...- Press the rotary/pushbutton @ to change
the setting.
...- Turn the rotary/pushbutton @ to change
between the settings.
REGION {reception area)
Select the reception area for the radio reception.
Settings: EUROPE, ASIA, NORTH AM (North Ameri-
ca), SOUTH AM (South America).
...- Press the rotary/pushbutton @ to change
the setting.
...- Turn the rotary/pushbutton @ to change
between the reception areas.
User settings
Making settings in the "VOLUME"
menu
LAST VOL
If you enable LAST VOL, the volume which was
set the last time you switched off the device is re-
enabled at switch-on. Settings: ON, OFF (the value
1 0 is automatically set at switch-on) .
A
Danger!
,
-~ ~--- ~--)
High volume
The power-on volume can be unexpectedly high
if the LAST VOL setting is selected and a high vol-
ume was set the last time the radio was switched
off.
Always set the device to a moderate volume .
...- Press the rotary/pushbutton @ to change
the setting .
...- Turn the rotary/pushbutton @ to change
between the settings.
BEEP {button beep)
Switching the confirmation beep on or off. Set-
tings: ON, OFF.
...- Press the rotary/pushbutton @ to change
the setting.
...- Turn the rotary/pushbutton @ to change
between the settings.
TA VOL {traffic information volume)
{only for reception area EUROPE)
Only possible with activated RDS function: Setting
the minimum volume for traffic announcements.
Settings: 15-40 .
...- Press the rotary/pushbutton @ to change
the setting .
...- Turn the rotary/pushbutton@ to set the
volume.
35
Advertisement
