Making Settings In The "Display" Menu; Making Settings In The "Volume" Menu - Blaupunkt BARCELONA 230 Operating And Installation Instructions

Making settings in the "DISPLAY"
menu
DIM MODE
Select automatic or manual switching of the dis-
play brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
play brightness can be switched manually).
setting.
Turn the volume control
between the settings.
Automatic switching of the display brightness is
possible only If your car sound system is installed
as described in the installation instructions and
your vehicle features the corresponding connec-
tion.
DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 – 16.
setting.
Turn the volume control
display brightness.
SCROLL
Select the display of scrolling text (e. g. when
le names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
setting.
Turn the volume control
between the settings.
02_Barcelona_Brisbane_World_gb.indd 27
button 3 to change the
to change
4
button to change the
3
to set the desired
4
button to change the
3
to change
4
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: 1 – 50.
button
setting.
Turn the volume control
power-on volume.
LAST VOL
If you select the setting LAST VOL, every time you
switch on the radio, the volume level that was set
again. Settings: ON, OFF.
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
.
Always set the device to a moderate volume.
button
setting.
Turn the volume control
between the settings.
c announcement volume)
(only for reception area EUROPE)
ments. Settings: 1 – 50.
button
setting.
Turn the volume control
TEL VOL (handsfree volume)
Adjust handsfree volume. Settings: 1 – 50.
button
setting.
Turn the volume control
User settings
to change the
3
to set the desired
4
is activated
to change the
3
4 to change
c announce-
to change the
3
to set the volume.
4
to change the
3
to set the volume.
4
27
20.06.14 09:43