Toshiba TEC CB-416-T3-QQ Owner's Manual page 93

The table below summarizes the tabs and functions available for the printer.
TAB
Display the printer name.
Type and display the comment.
General
Specify the separator page.
Perform the test print.
Display the printer name.
Specify the output port.
Select the printer driver to be used.
Details
Make the timeout settings.
Make the spool settings.
Make the port settings.
Color
Management
Specify the type of Ribbon Save.
Select the media sensor to be used.
Specify an amount of space between labels.
Specify whether to perform back feed in the Issue
Stock Mode.
Enable the cutter option and specify a cut interval.
Specify the print speed.
Make a fine adjustment (including feed or back
feed amount and cut position).
Select the graphics transfer mode.
Options
Adjust print density.
Specify a type of ribbon to be used.
Adjust the Ribbon Motor Voltage.
Feed labels or tags.
Device Settings Cut labels or tags.
Perform the test print.
Check if there is any problem with the print head.
About View the license information.
View the printer driver information.
Make the Sharing Settings.
Sharing
Select the language to be displayed.
Regional Setting
Select the measuring unit.
Specify the label stock (only Label Size).
Select the orientation (tag rotation).
Specify the number of copies to be printed out.
Page Setup
Specify the User Command.
Specify the device lines. (The Line Command is
used.)
Select the dithering pattern.
Specify tone (RGB).
Specify whether to print in color or monochrome.
Graphics
Perform color registration (alignment).
Select the color method (process/spot color)
Specify the color for the spot color printing.
Bar Fonts Specifying bar code font settings.
Appendix 3
Function
Quick Reference for Printing
See Section... Remarks
Please refer to the
user's manual of
your computer.
Please refer to the
user's manual of
your computer.
3.6.1
3.6.2
3.6.3
The Cutter Module
3.6.4
required.
3.6.4
3.6.4
3.6.5
3.7.1
3.7.2
3.8.1
3.8.1
3.8.1
The Cutter Module
3.8.1
required.
3.8.2
3.8.2
Please refer to the
user's manual of
your computer.
3.3.1 & 3.3.2
3.3.3
3.3.4
3.3.4
3.3.4
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
3.4.6
3.5.1
85