Toshiba TEC CB-416-T3-QQ Owner's Manual page 23

2.5 Loading the
Media (Cont.)
Notes:
Pass the media straight from the
Supply Holder Unit to the Media
Outlet to avoid skewing.
Use the marks at the Media Slide
and the Media Outlet so that the
media can be centered.
Be sure to take up any slack in the
media.
Note:
Push down the Pinch Roller Unit
gently on the "PUSH HERE" label.
18 Feed the media to the Media Outlet manually until its leading
edge comes out of the Media Outlet.
(Top View of the Printer)
Media
Media Outlet Print Head Blocks
(Side View of the Printer)
Media
Right
Print Head Blocks
Wrong
Media
19 Push down the Pinch Roller Unit until it is hooked. Then push
down the Pinch Roller Lever to the ROLLER LOCK position.
20 Reinstall the Supply Shaft Holder Stand to the Supply Shaft Holder,
whose level is adjusted in Steps 3 to 5.
Chapter 2 Printer Installation
Media Guide
Media Inlet
Print Head Blocks
Pinch Roller
Pinch Roller
[PUSH HERE]
Supply Shaft Holder Stand
Supply Roll
Holder
Pinch Roller Lever
(To ROLLER LOCK)
15