Toshiba TEC CB-416-T3-QQ Owner's Manual page 70

3.10 Printing a Label
(Cont.)
Note:
Only five property pages are available
in the application programs: Page
Setup, Graphics, Stock, Options, and
About.
Note:
If the ERROR LED flashes or
illuminates, and an error message
appears on the printer's Message
Display, an error has occurred. Please
see Chapter 6 to take the proper action.
62
3 Be sure to check the following in each property page before
printing:
Label size and orientation. See Section 3.3 for more detail.
Dithering and intensity. See Section 3.4 for more detail.
Print method, sensor, label gap, issue mode, print method, fine
adjustment, and so on. See Sections 3.6 for more detail.
Print density adjustment. See Section 3.7 for more detail.
When finished checking the property pages, click OK to return to
the Print dialog.
4 Set Print range and Number of copies, and click OK to start
printing the label.
The ON LINE LED flashes when the printer is communicating
with your computer.
The ON LINE LED illuminates while printing.
5 This completes printing a sample label.
Chapter 3 Printing