Toshiba TEC CB-416-T3-QQ Owner's Manual page 108

A5.4 Parameter
Setting (Cont.)
Note:
Use the FEED or RESTART key
to enter a desired option.
Note:
The ribbon type can also be changed
in the printer properties on the
computer. See Section 3.8.1.
100
Specifying the Print Head to be Used
PM ADJUST
Press the PAUSE key.
After "PM ADJUST" appears, press the FEED key.
HEAD SELECT
To select which print heads will be used, press the PAUSE key.
BLACK
Select "ON" to use the black print head. Otherwise "OFF" will
disable the head.
After making a selection, press the PAUSE key.
MAGENTA
Make a selection for the other three colors in the same manner.
After making the selections, press the PAUSE key, and the
message returns to "<2> PARAMETER SET".
Specifying the Ribbon Type to be Used
HEAD SELECT
Press the PAUSE key.
After "HEAD SELECT" appears, press the FEED key.
RIBBON
The ribbon type for each color can be selected. Press the PAUSE
key.
BLACK
Select which ribbon will be used for the black ribbon: F1 (Hot
Release Ribbons) or P1S (Cold Release Ribbons).
After selecting the ribbon type, press the PAUSE key.
MAGENTA
Select the ribbon type for the other color ribbons in the same
manner.
After selecting the ribbon type for all colors, press the PAUSE
key. The message returns to "<2> PARAMETER SET".
Appendix 5
ON
ON
F1
F1
System Mode