A5.4 Parameter
Setting (Cont.)
Note:
When C or D is selected, the acceptable
values are 01 to 29.
Note:
Use the FEED or RESTART key
to select a desired value or option.
98
MAGENTA
Next enter the value within a range of 00 to 31 for the best
alignment.
When entering the value, press the PAUSE key.
CYAN
Then make alignments for the other two colors in the same manner
in the order of cyan and yellow.
When the alignments are complete, the message returns to "<2>
PARAMETER SET".
Now verify that the X/Y direction alignment is correct.
HEAD ADJUST
Press the PAUSE key twice.
CHECK
Press the PAUSE key. The printer prints the X/Y Direction
Alignment Test.
After printing completes, the message returns to "<2>
PARAMETER SET".
Selecting the Printer Parameters
HEAD ADJUST
Press the PAUSE key.
After "HEAD ADJUST" appears, press the FEED key.
PRINTER PARA
The printer parameters are ready to be selected. Press the PAUSE
key.
Specifying the Character Code
FONT CODE PC-850
Select the character codes: PC-850 or PC-8.
After selecting the code, press the PAUSE key.
Specifying Zero Font
ZERO FONT
Select whether a 0 (zero) with a slash or no slash will be used.
After selecting the zero font, press the PAUSE key.
Appendix 5
B0_ 0
_ B 05
0
System Mode