Table of Contents
Advertisement
64
Getting Started
Adding memory
Do not force the memory module into position. The memory
module should be level when secured in place.
The clips on either side of the memory module will click to
secure the memory module.
14
Replace the memory module slot cover and tighten the
screw.
15
Turn the computer over and restart it.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in
Removing a memory module
If you need to remove a memory module:
1
Complete steps
page 59
module slot cover.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
"Checking total memory" on page
1–6
to shut down the computer and open the memory
in
"Installing a memory module" on
66.
Advertisement
Table of Contents
