Table of Contents
Advertisement
Using ConfigFree™ with your Toshiba Computer
removed from the computer. When the cable is reconnected,
the connection to the wired LAN is re-established.
To use the Automatic Switch feature:
1
Right-click the
2
Click Auto Switch. The Auto Switch dialog box appears.
3
Check Enable Wireless when cable disconnect occurs.
4
Click OK.
NOTE
Semi-Automatic Switch Feature
The Semi-Automatic feature alerts you when the computer
connects to a Service Set Identifier (SSID) stored in a profile,
When the computer connects to the designated SSID, a
notification window appears. You can then click this window
to connect using the settings specified in the profile.
To use the Semi-Automatic Switch feature:
1
Right-click the
2
Click Auto Switch. The Auto Switch dialog box appears.
3
Select the Auto Switch (SSID) tab.
4
Select the profile to be automatically selected when the
SSID is detected, then click Add. The profile is moved to
the List of target SSIDs and profiles.
5
Repeat the previous step for each additional profile you
want to select.
Semi-Automatic Switch Feature
If your computer is connected to multiple wireless LAN
devices, the Auto Switch (SSID) feature is disabled. To enable
this feature, only one wireless LAN device can be used.
icon in the system tray.
icon in the system tray.
321
Advertisement
Table of Contents
