Table of Contents
Advertisement
58
Getting Started
Using the TouchPad™
Using the Control buttons
When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program's documentation to
determine if it uses the right mouse button.
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable the TouchPad setting:
1
Click Start, Control Panel.
The Control Panel window appears.
2
Click Printers and Other Hardware.
3
Click Mouse Properties.
The Mouse Properties window appears.
4
Click the TouchPad ON/OFF tab.
The TouchPad ON/OFF tab appears.
5
Select Disable or Enable, whichever is appropriate.
6
Click Apply.
7
Click OK.
The Mouse Properties window closes.
8
Close the Printers and Other Hardware window.
9
Close the Control Panel window.
Advertisement
Table of Contents
