Features - NETGEAR AirBridge WBC502 Hardware Installation Manual

Insight Instant AirBridge WBC502 Hardware Installation Guide
For more information, see the user manual, which you can download from
netgear.com/support/download/.
• Using NETGEAR Insight, you can set up a pair or a group of AirBridges, with one
AirBridge functioning as the master and one or more other AirBridges functioning
as satellites.
For more information about NETGEAR Insight, visit netgear.com/insight and see the
NETGEAR knowledge base articles at netgear.com/support.

Features

The AirBridge supports the following key features:
• 2.4 GHz dedicated radio for the management SSID
• 5 GHz radio with 2x2 MU-MIMO for the support of 802.11ac/a/n WiFi clients
• WPA-PSK and WPA2-Enterprise WiFi security
• Advanced features such as WiFi output power level control, traffic shaping, and
realtime RSSI indication
• Automatic site survey to detect BSSIDs and SSIDs
• 2 Gigabit Ethernet ports for network connections
(For more information, see Bottom panel with Ethernet ports on page 15 and Power
adapter on page 16.)
• Includes the following mounting hardware:
- Wall mounting screws and anchors
- Pole mounting strap
(For more information, see Step 5: Mount the AirBridge on page 40.)
• Full compatibility with IEEE switching standards:
- IEEE 802.3 Ethernet
- IEEE 802.3u 100BASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.1Q VLAN tagging
- IEEE 802.3x Full-duplex flow control
- IEEE 802.1p Class of Service (QoS)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1x RADIUS network access control
Introduction 7 Hardware Installation Guide