NETGEAR AirBridge WBC502 Hardware Installation Manual page 10

Insight Instant AirBridge WBC502 Hardware Installation Guide
• To help protect your system from sudden, transient increases and decreases in
electrical power, use a surge suppressor, line conditioner, or uninterruptible power
supply (UPS).
• Position system cables, power adapter cables, or power cables carefully. Route
cables so that they cannot be stepped on or tripped over. Be sure that nothing rests
on any cables.
• Do not modify power adapters, power adapter cables, power cables or plugs. Consult
a licensed electrician or your power company for site modifications.
• Always follow your local and national wiring rules.
Failure to follow these guidelines can result in damage to your NETGEAR product, which
might not be covered by NETGEAR's warranty, to the extent permissible by applicable
law.
Introduction 10 Hardware Installation Guide