Reset Button - NETGEAR AirBridge WBC502 Hardware Installation Manual

Insight Instant AirBridge WBC502 Hardware Installation Guide

Reset button

The AirBridge provides a recessed Reset button on the bottom panel so that you can
return the AirBridge to its factory default settings, causing all custom settings to be
erased.
Note: If you use the local browser UI to overwrite the factory default settings with user
default settings, the AirBridge is returned to user default settings when you press the
physical Reset button, as described in the following task. In such a situation, to return
the AirBridge to the actual factory default settings, access the local browser UI, and use
the software Reset button. For more information, see the user manual, which you can
download by visiting netgear.com/support/download/.
To return the AirBridge to its factory default settings or user default settings:
1. Insert a device such as a straightened paper clip into the opening of the Reset button.
2. Press the Reset button for at least 10 seconds, or until the Power LED starts to blink.
The AirBridge restarts and returns to factory default settings or user default settings.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset.
Do not turn off the AirBridge. Wait until the AirBridge finishes restarting.
Hardware Overview 18 Hardware Installation Guide