General Specifications - Omron NX1 Series Manual

General Specifications

Item
Enclosure
Grounding method
Ambient operating
temperature
Ambient operating humidity 10% to 95% (with no condensation)
Atmosphere
Ambient storage
temperature
Altitude
Pollution degree
Operating environment
Noise immunity
Overvoltage category
EMC immunity level
Vibration resistance
Shock resistance
Life
Battery
Model
EU Directives
cULus
Applicable standards * 1
Shipbuilding Standards
Other than the above.
*1. Refer to the OMRON website (http://www.ia.omron.com/) or consult your OMRON representative for the most recent applicable standards for
each model.
Mounted in a panel
Ground to less than 100 Ω.
0 to 55°C
Must be free from corrosive gases.
-25 to 70°C (excluding battery)
2,000 m max.
2 or less: Meets IEC 61010-2-201.
2 kV on power supply line (Conforms to IEC 61000-4-4.)
Category II: Meets IEC 61010-2-201.
Zone B
Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m/s
100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Conforms to IEC 60068-2-27.
147 m/s 2 , 3 times in X, Y, and Z directions
5 years (Power ON time rate 0% (power OFF))
CJ1W-BAT01 (sold separately)
EN 61131-2
Listed UL 61010-2-201 and ANSI/ISA 12.12.01
NK, LR
RCM, KC, and EAC
Machine Automation Controller
Specification
2
NX1
17